If you are swapping existing handles for new handles through our handle program. We will need to know your existing handle measurement.
RF Door Program- Package D
You bring the doors to us and we do the rest!
Follow the instructions and videos below!
Any questions can be sent to email@example.com
We will need to know whether you have framed or frameless cabinets and what your overlay is. Be sure to watch video in full in order to provide necessary information.
Take Down, Prep, Prime & Paint Instructions
Cabinet Take Down Instructions!
Be sure to watch the accompanying video so all steps are followed precisely for take down. If the doors are not labeled correctly, they will unfortunately be turned away.
Step 1) Draw a Map
Step 2) Label the cabinets (see additional video below about labeling, be sure to watch it all the way through, especially if you have pull outs!)
Step 3) Organize hinges and handles
Step 4) Remove doors - also info on how to remove fake drawer panels provided.
Side panels are painted in place as part of the frame.
**Hover on the video and click the 4 arrows to expand video**
Apply paint in the same method as primer! Watch the video for a few tips and tricks! The paint is also a protective top coat so there is no "clear" coat that goes over top of this.
Door Labeling Handles
Pick Up Instructions
Bring blankets and towels in order to wrap your doors for transport. Sheets will not be thick enough. When you arrive home, unpack your car and unwrap your doors. Your doors will still be curing and should be leaned against a wall if not not being installed immediately.
Prior to install you will need to remove hooks. We recommend doing this as you go, door by door, so you can follow your map.
Wipe up spills immediately. If you have a chip or water damage be sure to touch up when you see the damage. If a chip is allowed to stay, damage will get worst. Cabinets should be cleaned with warm water and a soft sponge. NO multi purpose or natural cleaners or harsh chemicals should be used.